TERRA-EXTRACTOR X 100

Cable Burster 10 tons

		cableburster TERRA EXTRACTOR X 100

Lead pipe replacement and renewal of smallest pipes made easy with the X 100

    The TERRA-EXTRACTOR X 100 is the ideal machine for your house connections.

    The X 100 is for replacement of old pipes made from lead, plastic and steel. With this pipe bursting machine you can burst smallest pipes with inner diameter Ø 13 - 50 mm (1/2 “ – 2”) and pull in new HDPE pipes Ø 20 – 63 mm (3/4” – 2.5”) in lengths up to 30 m (100 ft). With a maximum pulling force of 100 kN (10 tonnes / 22‘000 lb/11 US tons) it is a strong but compact machine.

    The pipe replacement machine X 100 can operate on smallest areas of L x W = 0.65 m x 0.40 m (25” x 16”).

Lead pipe replacement and renewal of smallest pipes made easy with the X 100
Lead pipe replacement and renewal of smallest pipes made easy with the X 100


Unique clamping jaws

    Four cable clamps with longitudinal slots (patented) guarantee secure contact to the pulling cable, no matter if the cable is new or dirty. The main clamp clamps the cable when the two cylinders push the main clamp upwards. The counter clamp holds the cable under tension when the two cylinders move downwards and the main clamp is released.

Unique clamping jaws
Unique clamping jaws


Safety kit

    The X 100 is officially checked by the European Safety institute according due to European law. The safety kit was especially made for the British market and includes:
  1. electric strike alarm with tester
  2. grid and grounding stick
  3. 2 pairs isolation gloves 17 kV
  4. 15 m long electric cable

    Further the X 100 has an outer burst protection sheaving around the hydraulic hoses in case of a burst.

Safety kit
Safety kit


Comparison rod burster to cable burster

    Compared to pipe renewal systems with rods, so called „rod bursters“, wire bursters have the advantage that the pipe renewal job can be done by one single operator without any interruption for dismantling the rods. No operator has to be in the working pit during the bursting operation.

Comparison rod burster to cable burster
Comparison rod burster to cable burster


Driven by Power Pack 190x23 or excavator

  1. The X 100 is driven by the Power Pack X 100. Alternatively it can be driven directly with the hydraulics of your excavater (BST 3/4" or 1" or flat-face couplings).
  2. Petrol engine with 15 HP (11.4 kW)
  3. Electric starter and battery
  4. Hydraulic oil: 23 ltr/min @ 175 bar (6 gpm @ 2‘750 psi)
  5. Hydraulic tank: 30 ltr (8 gal)
  6. With oil cooler, with manometer (gauge)
  7. Galvanized frame
  8. Dimensions: L x W x H = 820 x 600 x 500 mm L x W x H = 32.3" x 23.6" x 20"
  9. Weight: 84 kg/185 lbs (without hydraulic oil, without petrol)
    Weight: 118 kg/260 lbs (with hydraulic oil, full petrol tank)

Driven by Power Pack 190x23 or excavator
Driven by Power Pack 190x23 or excavator


 

Technical Data

Technical Data



Technical specifications can be changed without previous notice.
pulling force
100 kN (10 to) bei175 bar
22'000 lbs (11 US tons)
Old pipe range
Ø 15 - 50 mm
Ø 1/2" - 2"
New pipe range
Ø 20 - 63 mm
Ø 3/4" - 2.5"
Bursting length
bis 75 m
up to 250 ft
productivity (speed)
- by 10 l/min (oil volume)
60 m/h (1 m/min)
200 ft/h (3.3 ft/min)
- by 20 l/min
120 m/h (2 m/min)
400 ft/h (6.6 ft/min)
Max. operating pressure
175 bar
2'500 psi
Required oil volume
10 - 20 ltr/min
2.5 - 5 gpm
pulling cable
Ø 13 mm
Ø 0.51"
Cable weight
0.92 kg/m
0.62 lbs/ft
L x W x H
0.63 m x 0.40 m x 1.53 m
24.8" x 15.7" x 60"
weight (without cable)
201 kg
443 lbs
weight control station
29 kg
64 lbs


 up

TERRA AG für Tiefbautechnik - Hauptstrasse 92 - 6260 Reiden - Schweiz - Tel. +41 62 749 10 10 - office@terra-eu.eu